Airtime Valve Trap

One Valve Trap will re-stick one valve. Works with almost any valve and will stick to almost any bladder if you clean it correctly (And then there's the 2018 bladder material from North. That stuff is slippery! Good luck there. You might just want to get a new bladder actually). Made in the USA.

We developed the Valve Trap because people have asked us for years why they couldn't re-use their perfectly good valves when they started leaking. This is the solution that lets you quickly and permanently attach a new or used valve to any bladder (Well, almost. Seams 2018 North bladder material is almost impossible to stick anything to...good luck fixing 'em. You might want to go for a new bladder). Repair old bladders or assemble new. The Valve Trap sandwiches any valve between two layers of soft foam and seals the valve in place with a specialized adhesive. The Valve Trap then provides a large 4" diameter base with 'peel and stick' adhesive that will permanently adhere to any bladder, new or used. Don't quite understand how it works? Click here to check out our documentation and read testimonials or watch the videos below (it's a playlist...I'm pretty sure you'll see a video highlighting your valves in there somewhere). Perfect fix to re-attach original valves when they come loose and begin to leak. Keep your original valve and be back on the water in minutes. ATTENTION: - Do not use the Valve Trap with a ball valve. Replace faulty ball valves with new one-way valves (check-flap style). - Make sure the valve spacing is correct when using the valve trap. If the valve spacing is off or if the bladder is not seated correctly and there is "pull" on the valve it can release from the Valve Trap. - Check all valves for cracks and/or wear before re-sticking them with the Valve Trap.